INSTALLATIONGB
Location
Place the appliance as far away as possible from sources of heat, e.g. radiators, heaters, direct sunlight, etc. Best performance is obtained with ambient temperature between +18°C and +43°C (class T);
+18°C and +38°C (class ST); +16°C and +32°C (class N); +10°C and +32°C (class SN).
The class of your appliance is shown on its rating plate.
If this appliance – equipped with magnetic door seals
–replaces an older appliance featuring a spring lock (mechanical latch) on the door or lid, please ensure that this lock is made completely unusable before «throwing out» the old appliance. This will prevent it from becoming a
For safety reasons, minimum ventilation must be as shown in Fig. 1:
Appliance positioned under overhanging kitchen wall units (see Fig.
Appliance positioned without overhanging kitchen units (see Fig.
Attention: keep ventilation openings clear of obstruction.
One or more adjustable feet mounted on the base of the appliance make it possible to set it perfectly level.
mm100 A mm10 NP007
B mm10
Fig. 1
Rear spacers
In the bag with the documentation, there are two spacers which must be fitted as shown in the figure.
Slacken the screws and insert the spacer under the screw head, then
Fig. 1a
PR153
TECHNICAL SPECIFICATION | GB |
The technical data is indicated in the rating plate on the left side inside the appliance.
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage.
For operation with different voltages, a suitably sized
37