Xerox MAX 200 manual Media specifications, System capability

Media specifications

	Roll media	Cut media	Manual feed tray media
Media size	ISO, E, D, C, B, A size	8.5 x 11 inch to	ISO, E, D, C, B, A, size widths
	widths	12 x 18 inch, long edge
		or short edge feed.
Media weight	20 lb.	20 to 24 lb.	20 lb.
Media type	Bond, vellum, film	Bond	Bond, vellum, film

System capability

Scanner resolution	15.7 dots/mm (400 dpi)
Warm-up time	Max. 5 minutes (when breaker switch is held ON)
First copy output time	20 seconds for E
Lead edge registration	Roll ± 3.0 mm
	Cut sheet B ±	2 mm
	Cut sheet A ±	0.5 mm
Side registration	Maximum of ±	1.5 mm difference in multiple prints.
Skew	Maximum of 1. 5 mm per 200 mm length
Lead edge deletion	Roll media (outside diameter of 100 mm or greater) = 5 mm
	Roll media (outside diameter of less than 100 mm) = 5 mm
	Cut sheet = 5 mm
Trail edge deletion	Roll media (outside diameter of 100 mm or greater) = 5 mm
	Roll media (outside diameter of less than 100 mm) = 5 mm
	Cut sheet = 5 mm
Image area size	880 mm wide
Continuous prints (per	A: 29 minimum SEF, 36.5 minimum LEF
minute)	B: 22.2 minimum SEF, 29 minimum LEF
	C: 16.9 minimum SEF, 22.2 minimum LEF
	D: 12.5 minimum SEF, 16. 9 minimum LEF
	E: 9.1 minimum SEF
Copy output tray	100 E-size sheets
capacity (printer)
Document exit tray	50 D-size sheets
(scanner)	50 E-size sheets with extension bar pulled out
Document size	36 inch maximum width
	0.05 mm to 0.2 mm thickness

Technical data 281