Xerox MAX 200 manual Document width screen is displayed, Select 8.5 inch or 9 inch

How to change the system features (continued)

Document width

Introduction

The document width feature sets up the document series the scanner recognizes in auto mode.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features Copy features

Time &Date

Auto Power Off

Auto Power save

Auto Clear/ Backlight Off

Attention Tone

Document Width

Plotter Setup

Loading Stamp Data

Storage/Disk

Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the system features tab.

3.Use the arrow buttons to select the document width feature.

4.Select open.

The document width screen is displayed.

Custom Presets
Document Width	Cancel	Done

Select document width, 8.5 inch or 9 inch

8.5 inch 9 inch

5.Select 8.5 inch or 9 inch.

6.Select done to store your changes and exit from this screen. To cancel the changes and exit from this screen, select cancel.

7.To exit, press the custom presets button.

How to customize the MAX 200 181