Xerox manual MAX 200 power, Switching the power-on

MAX 200 power

The Max 200 power chapter provides machine power information.

The following topics are discussed:

•Switching the power-on

•Switching the power off

•Ground fault protectors

•Warm-up

•Auto power-off

•Power save

Switching the power-on

Caution: Never switch off the printer or scanner when the printer is in operation.

Note: This procedure is for the printer and scanner only. If your system contains the folder or stacker, refer to their user guide for power-on instructions.

1.Turn the key and open the printer circuit breaker door.

2. Switch the printer circuit breaker to the on position (up).

3.Close the printer circuit breaker door and turn the key to lock the door.

MAX 200 power 39