Xerox MAX 200 manual Manual mode, Introduction

In manual mode

Introduction

When MAX 200 is in manual mode, all output lengths are based on the same auto mode standard sizes and the nonstandard size

30 x 42 inch.

The following features are available for manual mode:

•Manual 100% - Copy at 100%

•Manual R/E – Reduce or enlarge your copies from 25% to 400%, 0.1% increments are available

•Cut roll media – Standard, synchronized, long copy or variable length

•Add/remove margins – you can add up to 999 mm or remove up to 90 mm margins in 1 mm increments to either the lead or trail edge of your copy (enabled with synchronize and long copy)

•Manual feed mode – Enable the manual feed tray

Documents can be scanned, short edge or long edge feed. If the scanned document size does not match the selected magnification and output media size, an error message is displayed.

60 How to make copies