Xerox MAX 200 manual How to load cut sheet media

How to load cut sheet media

Introduction

The cut sheet tray capacity is 1000 sheets (20 –24 lb.). The cut sheet tray holds 8.5 x 11 inch to 12 x 18 inch bond media (short edge or long edge feed).

Perform the following procedure when you need to load cut sheet media into tray 5.

Procedure

1. Pull out the cut sheet tray.

2. Load the media short edge or long edge feed. Refer to the media size label in the tray.

3. Adjust the guides to the media size.

Do not force the guides against the edges of the cut sheet stack.

4. Use the dial on the media series panel (tray 5), and set to the correct media series.

5. Push the tray in until it stops.

Note: Ensure the correct media series is displayed on the cut sheet panel. If not, ensure the media series panel (tray 5) is set correctly.

Media 51