How to customize the MAX 200 237
How to change the storage/disk manager features
(continued)
Stamp creation/deletion (continued)
Stamp creation
Note: If needed, you can setup your start position, for the stamp
location, to be the lead edge or trail edge of your document. If
needed, refer to page 192.
Note: Ensure to have a formatted disk to save the stamp pattern you
have created. If needed, refer to the format procedure on page 245.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the storage/disk manager tab.
3. Use the arrow buttons to select the stamp creation/ deletion
feature.
4. Select open.
The stamp creation/deletion screen is displayed.
Press [Custom Presets] to return to
Previous screen.
Stamp Creation/Deletion
Disk Manager (Format/ Duplication)
E-sorter (Programme) Settings
System features Copy features Storage/Disk
Manager
Open