Xerox MAX 200 manual Folder, Fan fold, Cross fold, No fold, Special fold

Folder

Note: If your system is set up with a folder, do not put A or A4 size media into the tray 5, short edge feed. Refer to your user guide for detailed information.

Introduction

This folder feature sets up the fold default for copy mode. There are three fold options available, P1, P2, and P3. You can also select no fold (this option is usually for systems with a stacker. You can not fold Film/Mylar or vellum media.

Procedure

1.Select the finishing feature group tab. If needed, refer to page 129.

2.Select the folder button, on the finishing screen. The folder screen is displayed.

Folder	Cancel	Done
		Additional
		Features
Fan Fold	Cross Fold	Binding
P1	P2	Margin
		Punch Tab &
		Reinforce
No Fold	Special Fold	First Fold
	P3	Only

3.Select the desired fold default for copy mode; P1, P2, no fold, or P3. To change P1, P2, or P3 parameters, refer to page 203.

Caution: You can set up P1, P2, or P3 to folds other than P1= fan fold, P2 = cross fold, and P3 = special fold at the folder, but the above screen displays P1= fan fold, P2 = cross fold, and P3 = special fold. Ensue to power off and power on, the folder, after changing any of the folds, other than what is displayed on the above touch screen.

Fan fold	Produces copies folded to A-size, but all panels
	may not be equal in size. With fan fold you can
	add a binding margin.
Cross fold	Produces copies folded in A-size, with all panels
	of equal size. You can not add a binding margin
	when cross fold is selected.
No fold	If no fold is selected, the right column of the
	screen changes to the exit column. Select the
	desired exit option; printer or folder.
Special fold	Produces other folds according to the setup of
	the folder. If your folder provides other fold
	operations, follow the folder user guide to set
	the machine to the other fold. Select the P3
	option, to set the fold default to special fold.

Finishing touch screen features 159