196 How to customize the MAX 200
How to change the copy features (continued)
Media type and width for auto mode
Introduction
The media type and width for auto mode feature sets up the
default media type for each output size (for auto mode). This custom
presets feature enables the auto mode panel to display the identified
roll information.
Procedure
1. Enter custom presets. If needed, refer to page 174.
2. Select the copy features tab.
3. Use the arrow buttons to select the media type and width for
auto mode feature.
4. Select open.
The media type and width for auto mode screen is displayed.
Press [Custom Presets] to return to
Previous screen.
Reduce/Enlarge Presets
Media Type and Width for Auto Mode
Stamp Location and Orientation
Date Stamp Format
Folder Setup
A
uto/ Manual Mode
Media Cut Mode and Document Orientation
Lead/Trail Edge Default Synchro
System features Copy features Storage/Dis
k
Manager
Open