Xerox MAX 200 Stamp location Manual, Select stamp location Stamp location screen is displayed

Stamper (continued)

Stamp location (continued)

Manual

Note: To cancel changes and exit from any screen, select cancel on the touch screen.

Procedure

1.Select the finishing feature group tab. If needed, refer to page 129.

2.Select the stamper button, on the finishing screen.

The stamper screen is displayed.

Select Stamp number from			Selected 01
Stamp pattern screen
Stamper		Cancel	Done
	No. ??	No Print
On	Stamp	Numbering
	Pattern
	Auto	No Print	Red
Off	Stamp	Date Stamp	Stamp Color
	Location

3.Select on.

4.Select stamp location.

The stamp location screen is displayed.

Stamp Location and Orientation

Cancel

Normal

Y

Rotated 90o

	x
Rotated 180o	(0 – 999)
	mm
Rotated 270o	Enter X
	Coordinate

Done

(0 – 9999)

mm

Enter Y

Coordinate

Auto

5.Select the desired stamp orientation, normal, 900, 1800, or 2700.

When the stamp image is scanned (normally portrait), the scanned position becomes the default for normal. When 900, 1800, or 2700 is selected, the stamp is rotated 900, 1800, or 2700 from the default.

148 Finishing touch screen features