Xerox MAX 200 manual Additional setting system feature screen is displayed

How to change the system features (continued)

Additional setting

Introduction

The additional setting feature provides additional system default settings, for future needs.

Depending on the code entered, the MAX 200 allows you to further customize your machine. If needed, service will provide you with the additional setting code and field value.

The identified additional settings codes are:

•Automatic switching from roll to tray (copy mode), code 10.

•Automatic switching from roll to tray (plot mode), code 11.

•Trail edge starting point of stamp location, code 110.

•Enable synchronize cut in auto mode, code 200.

•Default cut mode for auto mode, when manual mode cut default is set to long copy, code 210.

For detailed information about the identified codes, refer to page 169.

Procedure

Press Custom Presets to return to

Previous screen.

System features Copy features

Time & Date

Auto Power Off

Auto Power save

Auto Clear/ Backlight Off

Attention Tone

Plotter Setup

Loading Stamp Data

Additional setting

Storage/Disk Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the system features tab.

3.Use the arrow buttons to select the additional setting feature.

4.Select open.

The additional setting (system feature) screen is displayed.

192 How to customize the MAX 200