NETGEAR WG302 manual How to Configure WPA-PSK, 14 WEP/WPA Settings menu

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

6.Choose WPA with Radius from the list.

7.Click Apply to save your settings.

How to Configure WPA-PSK

Note: Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.

To configure WPA-PSK, follow these steps:

1.Log in at the default LAN address of http://192.168.0.228 with the default user name of admin and default password of password, or using whatever LAN address and password you have set up.

2.Click WEP/WPA Settings in the Security menu of the WG302.

Figure 3-14: WEP/WPA Settings menu

3.Choose WPA-PSKfrom the list.

4.Enter the pre-shared key passphrase.

5.Click Apply to save your settings.

Basic Installation and Configuration 3-25

July 2005 v3.0