NETGEAR WG302 manual Enter the Radius settings

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

3.Enter the Radius settings.

•Authentication/Access Control Radius Server Configuration: This configuration is required for authentication using Radius. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server

•IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

•Port Number: Port number of the Radius Server. The default is 1812.

•Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant.

•Re-authentication Time: The time interval in seconds after which the supplicant will be authenticated again with the Radius Server. The default is 3600 seconds.

•Global-keyRe-Key Time: Check on this option to enable Re-keying of Global Key. The Global Key Re-Key can be done based on time interval in seconds or number of packets exchanged using the global key. The default is 3600 seconds.

•Update if any station disassociates: Check on this option to refresh global key when any stations disassociated with wireless Access Point.

•Accounting Radius Server Configuration: This configuration is required for accounting using Radius Server. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server.

•IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

•Port Number: Port number of the Radius Server. The default is 1813.

•Shared Secret: This is shared between the Wireless Access Point and the Radius Server while authenticating the supplicant.

4.Click Apply to save your settings.

Basic Installation and Configuration 3-27

July 2005 v3.0