Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

2.Click Radius Server Settings in the Security menu.

Figure 3-12: Radius Server Settings

3.Enter the Radius settings.

Authentication/Access Control Radius Server Configuration: This configuration is required for authentication using Radius. IP Address, Port No. and Shared Secret is required for communication with Radius Server. A Secondary Radius Server can be configured which is used on failure on Primary Radius Server

IP Address: The IP address of the Radius Server. The default is 0.0.0.0.

Port Number: Port number of the Radius Server. The default is 1812.

Basic Installation and Configuration

3-23

July 2005 v3.0

Page 23
Image 23
NETGEAR WG302 manual Click Radius Server Settings in the Security menu