Xerox MAX 200 manual Loading stamp data screen is displayed

How to change the system features (continued)

Loading stamp data

Introduction

The loading stamp data feature allows you to load stamp data automatically or manually from the floppy disk drive.

If the loading stamp feature is set to auto, the machine automatically loads the stamp data at power-on. When set to manual, the machine allows you to load the stamp data from the stamp pattern screen.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features Copy features

Time &Date

Auto Power Off

Auto Power save

Auto Clear/ Backlight Off

Attention Tone

Plotter Setup

Loading Stamp Data

Storage/Disk Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the system features tab.

3.Use the arrow buttons to select the loading stamp data feature.

4.Select open.

The loading stamp data screen is displayed.

190 How to customize the MAX 200