Xerox MAX 200 manual Numbering stamp Option Function Fixed

Stamper (continued)

Numbering

Note: Ensure your loaded stamp pattern has enough room to include the numbering stamp. All stamp patterns can not exceed 70 mm squared = 4900 mm2.

Note: If you do not want an image stamped on your drawing, but you do want to use the numbering feature, create a blank stamp.

Introduction

The numbering stamp feature allows you to create the numbering stamp and insert it into an existing stamp pattern.

The numbering stamp may contain a maximum of 12 alphanumeric characters. The font used for all characters is 14 point gothic, and can not be changed.

There are two numbering options available; fixed and sequential.

Numbering stamp

Option	Function
Fixed	The maximum number of characters is twelve. The
	same characters are printed on all copies. Refer to
	page 142.

Sequential The maximum number of characters is twelve. The first 8 characters are printed on all copies, the next 4 characters are the number of the copy, within the set. Refer to page 144.

The sequential feature is only enabled when the collated E-sorter option is selected.

Finishing touch screen features 141