Xerox MAX 200 manual Auto power save screen is displayed

How to change the system features (continued)

Auto power save

Introduction

The auto power save feature reduces the machine power if the machine is not used for a selected period of time. You set the time period.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features Copy features

Time &Date

Auto Power Off

Auto Power save

Auto Clear/ Backlight Off

Attention Tone

Plotter Setup

Loading Stamp Data

Storage/Disk

Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the system features tab.

3.Use the arrow buttons to select the power save feature.

4.Select open.

The auto power save screen is displayed.

Custom Presets
Auto Power save		Cancel	Done
	Select time (from end of last Copy Job)
	until power save
	1 minute	3 minutes	5 minutes
No	10 minutes	20 minutes	30 minutes

5.Select the desired time; No, 1 – 30 minutes.

6.Select done to store your changes and exit from this screen. To cancel the changes and exit from this screen, select cancel.

7.To exit, press the custom presets button.

178 How to customize the MAX 200