Xerox MAX 200 manual Sorter program settings Store, Enter number of copies using numeric

How to change the storage/disk manager features (continued)

E-sorter (program) settings (continued)

Store

The selected E-sorter program number screen is displayed (If 5 was selected from the previous step, the screen below would display Store: 5).

Select Customer Number using arrow keys

Enter number of copies using numeric

Store: 5 Cancel Done

Customer No.

Copy Sets

Customer No.

Copy Sets

Customer No.

Copy Sets

Customer No.

Copy Sets

Stored Job No.

8.Use the arrow buttons to select the desired customer number.

9.Enter the number of desired copy sets for each desired customer number, using the numeric keypad.

If you would like to apply the copy features from a stored job, select the stored job no. button. Else continue to step 12.

The store screen is displayed.

Enter Stored Job Number using numeric keypad

Store: 5 Cancel Done

Enter Stored Job Number

(number must be in the Stored Job memory)

If Stored Job feature is not required,

Press [C] on keypad to clear Stored Job Number

Stored Job Number 7

10.Use the numeric keypad to enter the stored job number (the screen above displays stored job number 7).

Only the following settings are transferred to the program, auto mode, the cut mode, stamping setup, document feed direction an the reduction and enlargement settings.

11.Select done.

252 How to customize the MAX 200