Xerox MAX 200 manual New program number screen is displayed, Change setup screen is displayed

E-sorter (continued)

Program (continued)

Enter Program Number of next document Load document face down

E-sorter (Program)

Number of Customers:	5
Storage pattern:	Off
Reduce/Enlarge:	Auto

Available Memory ** %

Program Number

(1 – 300)

1

After loading all documents, press [Done] to start printing the remaining sets. Press [Stop Copy] or [All Clear] on panel to stop operation.

Change Setup Delete Done

7.Check the copy.

•If the copy is not acceptable select delete. The document image just scanned is deleted. The deletion screen is displayed. Select confirm to delete.

8.Change the program number if required.

The new program number screen is displayed.

9.To change the setup of the next document, select change setup, else continue to step 11.

The change setup screen is displayed.

Ready to Copy (E-Sort/Collated)		Counted 01/04
Load document face down
Change Setup		Close
Media	Standard	Sharpness	Normal
R/E
Image	B: Normal	Background	Off
Density	R: Normal	Suppression
Document	Line/	Scan Color	Off
Image Type	Fixed
Print	Black Only	Stamper	Off
Image	Off
Location
Editing	Off

10.Select the desired feature button. Select the new settings.

11.Insert the next document to be copied, or select additional features as required.

•Repeat steps 7 to 11 until all documents in the document set are scanned.

12.Select done on the E-sorter (program) screen to begin making copies of the remaining documents.

136 Finishing touch screen features