Xerox MAX 200 manual RFC panel, Icon Function, Message Function, Window Function, Button Function

RFC panel

There are four RFC panels, one for each roll. Each panel displays, the amount of media on each roll, the media roll number, the media type and the media series information.

The RFC panels are located on right side of the printer. For detailed information about the RFC media specifications, refer to the appropriate chart in Media, starting on page 43.

For instructions on how to load roll media into the drawer, refer to page 49.

Icon Function

Indicates the roll number in the RFC drawer.

The media supply indicator lamp displays the amount of media on the roll. When the roll is empty, there are no horizontal lines lit.

Message Function

Displays the media type. Media type is set from the media type and series panel, on page 38.

Window Function

Displays the media width for the selected series. Media series is set from the media type and series panel, on page 38.

Button Function

Press the trim button to perform the auto cut function on roll media. For detailed information on how to use the trim button, refer to page 52.

Note: To enable the trim function, the printer must be offline.

36 Getting to know the MAX 200