Xerox MAX 200 manual Warm-up, Auto power-off mode, Power save

Warm-up

When the MAX 200 is switched on, the machine enters a warm-up cycle and the please wait message is displayed on the touch screen and the printer control panel. The warm-up cycle is approximately 5 minutes at 72oC, 55% humidity.

During the warm-up cycle the scanner does not respond to button selections. When the ready to copy message is displayed on the touch screen and ready to copy/print is displayed on the printer, you can begin to scan documents or select any touch screen feature or option.

Auto power-off mode

When the machine is not used for a selected period of time, the auto power-off feature switches the machine power to off. To exit the auto power-off mode, you must power-on the machine. For detailed information on how to power-on the MAX 200, refer to page 39.

Once the machine completes the warm-up cycle, and the ready to copy message is displayed, you may begin copying again.

The auto power-off timer can be set from 1 to 5 hours, or the feature can be disabled entirely by entering No minutes. The factory default is set to No minutes.

For detailed information on how to change the auto power-off mode default, refer to page 177.

Power save

The power save function reduces machine power consumption when the machine is not used for a selected period of time. The current to the fuser is reduced, and the electrical control signals (except the control panels) are switched off.

To exit the power save mode press the power save button, located on the scanner control panel.

Once the machine completes the warm-up cycle, and the ready to copy message is displayed, you may begin coping again.

The power save timer can be set from 1 to 30 minutes, or the feature can be disabled entirely by entering No minutes. The factory default is set to No minutes.

For detailed information on how to change the power save default, refer to page 178.

42 MAX 200 power