Xerox MAX 200 manual Meter check button, Custom presets button

Scanner control panel (continued)

Meter check button

Note: The meter check screen displays two fields, billing and service. The service field is for the service representative.

Introduction

The meter check button provides access to the billing meter. The meter displays the printer media usage.

The machine serial number is also displayed on the meter check screen. It is located at the lower right corner of the screen.

Procedure

1.Press the press to open latch, at the upper right corner of the scanner control panel cover.

The scanner control panel cover is open.

2.Press the meter check button.

The meter check indicator lamp is lit and the meter check screen is displayed.

The billing field displays the media usage.

3.To exit, press the meter check button.

The basic feature group screen is displayed.

Custom presets button

Note: For detailed information on how to enter the custom presets feature, refer to page 174.

Introduction

The custom presets button provides access to various default settings. There are three feature groups; system, copy and storage/disk manager.

Procedure

1.Press the press to open latch, at the upper right corner of the scanner control panel cover.

The scanner control panel cover is open.

2.Ensure the machine is in copy mode. If needed, refer to page 277.

3.Press the custom presets button.

The custom presets indicator lamp is lit and the system features tab is displayed.

4.Select the desired feature tab.

5.To exit, press the custom presets button.

24 Getting to know the MAX 200