Operation

•Privacy Zone Mask

To protect privacy, MAX. 4 Privacy Masks can be created on the arbitrary position to hide objects such as windows, shops or private house. With Spherical Coordinates system, powerful Privacy Zone Mask function is possible.

•GENERAL/SPECIAL Image Setup

WB(White Balance) and AE(Auto Exposure) can be set up independently for each preset. There are 2 modes, “General” mode & “Special” mode. The General mode means that WB or AE can be set up totally and simultaneously for all presets in “ZOOM CAMERA SETUP” menu. The Special mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each Special WB/AE value should activate correspondingly when camera arrives at each preset location.

During jog operation, General WB/AE value should be applied. All Special WB/AE value will not be changed regardless of General WB/AE value change.

•Semi Auto Focus

This mode enables to switch focus mode automatically operation by operation. Manual focus mode is selected during preset operation and Auto focus mode is recovered if jog operation is started. During Preset action, instead of auto focusing, manual focus data stored when it is created will be applied as soon as camera arrives to the preset. This is helpful to get well-focused image in a short time.

OSD DISPLAY OF MAIN SCREEN

￿

LABEL12345

PRESET1

Action Title

Preset Lable 1

Date/Time

 

 

 

 

 

 

Temperature

 

 

 

 

 

 

 

 

 

 

 

 

Alarm

Camera ID

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Information

 

 

 

 

 

 

 

 

P/T/Z Information

Image Flip

Camera ID

•P/T/Z INFORMATIONCurrent Pan/Tilt angle in degree, zoom magnifi cation and a compass direction.•Camera IDCurrent Camera ID(Address).•Action TitleFollowings are possible Action Titles and their meaning.
“SET PRESET ×××”

When Preset ××× is stored

“PRESET ×××”When camera reach to

 

Preset ×××
“PATTERN ×”

When Pattern × is in action

“AUPx/PRESET XXX”

When Auto Pan x is in action

“UNDEFINED”

When undefi ned function is

 

called to run
•Preset LabelThe Label stored for specifi c Preset.•Alarm Information

This information shows current state of Alarm Input. The “I” means Input and “O” is output. If an Input is ON state it will show the number of input. If an Input is OFF state, ‘-’ will be displayed. In the same way “O:1” means output 1 is ON “O:-“ is OFF.

Ex) When Point 2 of inputs are ON, and Output 1 is On, OSD will show as below

I:-2 0:1

•Image FlipShows that images are currently reversed by Auto Flip Function.•Temperature

Current Temperature: Boxed “C” and “F” means Celsius and Fahrenheit respectively

•Date/TimeDisplays Current Date and Time.

24 – 10X MINI SMART DOME CAMERA