Introduction

PARTS NAME & FUNCTIONS

❖SCC-C6323

￿

Surface Mount Bracket

Separating Slit

Dome Cover

DIP Switch

Cable Duct

Main Unit / Surface Mount Bracket

Back of Main Unit

•Surface Mount Bracket

This is used to install the camera directly on the ceiling. After separating this cover fi rst and then attach this directly to ceiling. Camera must be assembled at the last stage.

Do not use this bracket when installing camera on the wall with wall mount bracket or on the ceiling with ceiling mount bracket.

•Separating SlitUsing a coin, you can separate upper part lower body of the dome.
•Dome Cover

Do not detach protection vinyl from dome cover before fi nishing all installation process to protect dome cover from scratches or dust.

•DIP SwitchAdjusts camera ID and protocols.•Cable Duct

When you want to install the camera on the surface of hard ceiling, you need to handle the cable through side of the dome. In this case, break the side wall bit and make the cable pass through the cable duct.

10 – 10X MINI SMART DOME CAMERA