| Safety information |
| |
CAUTION |
|
| |
1. | Do not drop objects on the product or apply strong shock to it. Keep away from a location subject to |
| |
| excessive vibrationor magnetic interference. |
| |
2. | Do not install in a location subject to high temperature (over 50°C), low temperature (below |
| |
| humidity. Doing so may cause fi re or electric shock. |
| |
3. | If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall |
| |
| it. |
| |
4. | Remove the power plug from the outlet when then there is a lightning. Neglecting to do so may cause fi re or |
| |
| damage to the product. |
| |
5. | Keep out of direct sunlight and heat radiation sources. It may cause fi re. |
| |
6. | Install it in a place with good ventilation. |
| |
7. | Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the |
| |
| CCD image sensor. |
| |
8. | Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, |
| |
| shall be placed on the apparatus. |
| |
9. | The Mains plug is used as a disconnect device and shall stay readily operable at any time. | ENG | |
| |||
|
|
|
|
English – 3