Xerox MAX 200 manual Stamp location and orientation, Stamp location Auto, Stamp orientation Normal

How to change the copy features (continued)

Stamp location and orientation

Introduction
	The stamp location and orientation feature sets up the stamp
	location and orientation, for each media size and feed direction for
	the stamper auto option. The auto option is on page 151.
	To learn how to create a stamp pattern, refer to page 237.
Stamp location	Auto	Sets up the stamp location parameters for the auto
		option on page 151.
Stamp orientation	Normal -	Sets up the auto stamp orientation for the auto option on
	270 o	page 151.

Procedure

Press [Custom Presets] to return to Previous screen.

System features Copy features

Reduce/Enlarge Presets

Media Type and Width for Auto Mode Stamp Location and Orientation Date Stamp Format

Folder Setup

Auto/ Manual Mode

Media Cut Mode and Document Orientation Lead/Trail Edge Default Synchro

Storage/Disk Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the copy features tab.

3.Use the arrow buttons to select the stamp location and orientation feature.

4.Select open.

The stamp location and orientation screen is displayed

198 How to customize the MAX 200