Xerox MAX 200 manual Scanning setup screen is displayed

How to change the storage/disk manager features (continued)

Stamp creation/deletion (continued)

Stamp creation (continued)

Ready to store image on floppy disk
Stamp Creation/Store	Cancel	Done
Enter Size of	Start Position	Position of Date
Stamp Area on	0	0
Document to be
Scanned	0	0
	Stamp size	Position of Number
	0	0
	0	0
	Scanning	Scroll
	Setup

10.If needed, select scanning setup. Else continue to step 13.

•The scanning setup option allows you to modify the background suppression, image density, or reduce and enlarge the stamp pattern.

Note: A message is displayed if the stamp size exceeds 4900 mm2. If the end position measurements are greater than 4900 mm2 (X2,Y2) you can reduce the size by changing the X2,Y2 measurements or select the scanning setup option and reduce the image size.

The scanning setup screen is displayed.

Setting for R/E value, Copy density, and

Background suppression may be changed

Scanning Setup	Cancel		Done
Normal	Specify R/E% for Stamp size
Fixed
Background		25.0% −	100.0%
Suppression	100.0%
		100.0%
Red: Normal	64.7%		+0.1
Black: Normal	50.0%
Image
	25.0%		− 0.1
Density

How to customize the MAX 200 239