Xerox MAX 200 - page 31

Getting to know the MAX 200 29

Auto mode panel

Number Name Function

QMedia type The media type column displays the preset media type for th e

output media. For detailed information on how setup the media

type column, refer to page 196.

RDocument size Each document size column refers to a document size, which can

be feed into the scanner. In auto mode, the panel displays the

document size that is feed into the scanner.

SMedia supply The media supply column displays the auto mode media supply

information, such as the roll number, tray or drawer number, and

the amount of media in each drawer or tray.

Note: To display the correct media supply information, ensure

the media type and series panel and the media series panel (tray

5), are set correctly. If needed, refer to page 38.

TMedia size matrix The media size matrix displays the output media size.

UMode select button There are two modes of opera tions, auto or manual. If needed,

press the mode select button until the desired indicator lamp is lit.

The factory default is set to auto. For detailed information to set the

mode of operation, refer to page 212.

VDocument feed

direction button There are two feed directions, landscape or portrait. If needed,

press the document feed direction button until the desired feed

direction lamp is lit.

Note: The document feed direction button is disabled when

the machine is in manual mode.