Xerox MAX 200 manual Variable length default screen is displayed

How to change the copy features (continued)

Variable length default

Note: When the set variable length is longer than the original length, the excess is output blank.

Introduction

The variable length default feature sets up the default cut length for each roll, for the variable length option, located on page 85.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features Copy features

Media Type and Width for Auto Mode

Stamp Location and Orientation

Date Stamp Format

Folder Setup

Auto/ Manual Mode

Media Cut Mode and Document

Orientation

Lead/Trail Edge Default Synchro

Variable length default

Storage/Disk Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the copy features tab.

3.Use the arrow buttons to select the variable length default feature.

4.Select open.

The variable length default screen is displayed.

218 How to customize the MAX 200