Xerox MAX 200 manual Sorter program settings, Document Print

How to change the storage/disk manager features (continued)

E-sorter (program) settings

Introduction

The E-sorter program settings feature allows you to setup, modify, or delete an E-sorter program. The MAX 200 can store a maximum of 300 programs, into memory. Each program can have a maximum of 40 customers.

Lets say you have a set of drawings, one electrical, one plumbing, and one mechanical and you have four different customers. The E- sorter program setting feature allows you to print as many copies of each document to each customer.

The chart below is setup for program number 1. As you can see, this is a convenient tool for users to automate the copy function for jobs that have a complex distribution list.

		Program 1
	Copy quantity for each document
Customer	Electrical	Plumbing	Mechanical
number	document	document	document
1	Print 2	Print 0	Print 1
2	Print 0	Print 0	Print 1
3	Print 1	Print 0	Print 1
4	Print 1	Print 10	Print 1

Once the program is setup, you can print the deliver pattern automatically using the E-sorter program screen, on 135.

If needed, you can automatically setup each program to the same job settings from a specific stored job number.

To help setup your E-sorter programs use the above chart as an example for each of your E-sorter programs.

How to customize the MAX 200 249