Xerox MAX 200 Message On condition Remove output from, Folder Relatch fuser, Replace fuser web

Printer control panel (continued)

		Messages (continued)
Message	On condition
Remove output from	When the machine detects the folder is full.
folder
Relatch fuser	When the fuser is not correctly positioned.
Replace fuser web	When the fuser web needs to be replaced. To replace the web, call
	for service.
Load media indicated	Load media indicated below is displayed, when the machine detects
below	the selected media supply is empty.
	The following media information is also displayed:
	• Media series window displays the media series
	• Roll or paper
	• The type of media; vellum, bond or film
Made	The made window displays the number of copies made. Increments
	by one.

Selected The selected window displays the copy quantity selected.

Increasing Toner	When the machine starts to increase toner.
Diagnostics	When the machine is in diagnostic mode.
Clear Jam	When the machine detects a media jam. Check the printer diagram
	for the location of the jam.

Getting to know the MAX 200 31