Xerox MAX 200 manual Touch screen, Components

Touch screen

The touch screens contain messages, copy quantity information, tabs, buttons, icons and text. There are two types of screens, the copy feature screens and the custom presets screens.

The copy feature screens are grouped into four feature group tabs; basic, image quality, additional, and finishing. Whenever a selection is made from any of the tabs, the selection overrides the custom presets values until the clear all button is pressed.

The custom presets screens are grouped into three feature group tabs; system, copy, and storage/disk manager. When you enter custom presets you can customize the MAX 200 defaults, to meet your workflow requirements.

Components

Note: The screen below is an example of a copy feature screen. The text above the selection buttons, displays the current copy feature selections.

Ready to copy			Selected 01
Load documents face down
Basic	Image Quality	Additional	Finishing

Auto-Mode	Black	Red	Line	Black Only
			Fixed
R / E; Media:	Image		Document	Print Color
Cut	Density		Image Type

Message bar Displays the machine conditions, operator instructions, and copy quantity. In this example the message bar displays the following information:

Ready to copy	Selected 01
Load documents face down

Tabs There are four feature group tabs (basic, image quality, additional, finishing). When a tab is selected, the feature group menu is displayed. Each feature group has a specific set of selections.

Icons and text Each feature group screen is divided into columns, each column may contain an icon with text. Each column provides the operator a quick overview of the current job selections.

Selection buttons To select touch screen features or options, touch the desired button.

Getting to know the MAX 200 19