Pioneer Error Message Display, MEP-7000UPDATES, Troubleshooting, English, Error Code

TROUBLESHOOTING

ERROR MESSAGE DISPLAY

When MEP-7000is unable to operate properly, an error code is displayed on the display panel. Check the error code displayed against the following table and take the recommended action to correct the error. If an error code other than any of the error codes listed in the table below is displayed or if the same error code is displayed even after corrective action has been taken, contact your nearest Pioneer Service Station or contact the store from which you purchased your player for assistance.

Error Code	Error Type	Description	Possible cause and recommended action
E-7201	TOC READ ERROR	Player unable to read TOC	Disc is cracked.
		data.	 Recommended action: replace disc.
E-8301	PLAYER ERROR	File loaded cannot be played
E-8302		properly.	Disc is soiled or dirty.
E-8303			 Recommended action: clean disc.
			If other discs play normally, the problem is with
			the disc itself.
E-8304	DECODE ERROR	File loaded cannot be played	The file is not in a supported format.
		properly.	 Replace with disc or file compatible with the
E-8305	DATA FORMAT ERROR
			proper format.
E-8306	NO FILE
E-8307	USB WRITE FAILED	Writing could not be	The media has been write-protected.  Disable
		completed to the USB storage	the write-protect function.
		device.	 Replace the USB storage device.
E-9101	MECHANICAL TIME OUT	Mechanical operation has	Dust or some other form of foreign particles have
		failed to complete within	found their way into disc insertion slot.
		specified time interval.	 Recommended action: remove dust or other
			foreign particles.
E-6002	AUDIO DSP PROGRAM	Program cannot be written to	Consult your dealer or the nearest Pioneer Service
	DOWNLOAD ERROR	AUDIO DSP.	Station.

English

MEP-7000 UPDATES

Software for this unit may be updated to improve operation or functionality. For details consult the following support website: http://www.prodjnet.com/support/

67

En