INSTALLATION GUIDELINES
INSTALLATION GUIDELINES
•Placing and using the player for long periods on
•Install this player as far as possible away from tuners and TV sets. A player installed in close proximity to such equipment may cause noise or degradation of the picture. Noise may be noticeable when an indoor antenna is used. In such cases, make use of an outdoor antenna or turn off power to the player.
•When the unit is used in a
•Place this unit on a level surface and a stable platform.
•Do not place heavy objects on top of the unit.
Be sure the player, including its audio and power supply cords, does not touch vibrating materials. Any cause of vibration other than the insulators may cause sound skip.
Take special care when using the player while it is installed in a carrying case.
| Do not allow contact |
| with vibrating surfaces. |
| To assure proper heat- |
| dissipation, be sure to |
| maintain this open space. |
To assure proper | To assure proper |
sure to maintain this | sure to maintain this |
open space. | open space. |
Installing the
The screw holes on the front panel of the
Control unit complies with 3U specifications; drive unit complies with 2U. Maximum depth of unit is 324.6 mm.
•Attach the unit to the rack using screws of the appropriate size (screws not provided with the unit).
NOTE
•Do not install the unit immediately above a power amplifier, since damage may occur from the heat produced by the amplifier, or humming or other noise may be caused.
•When transporting the unit, remove the unit from its rack. Attempting to move the rack with the unit installed may result in damage to the unit.
•If the unit must be moved while still in its rack, take precautions to protect the unit from vibration and impact.
Transporting the unit
Never move the unit during playback.
During playback, discs rotate at very high speeds; never lift or move the unit during this time to prevent scratches or other damage to discs.
Transporting the unit
When moving the unit, always remove any discs that have been loaded, and turn off the power.
Moving the unit with a disc loaded could result in damage to the disc or unit.
About carrying cases
The jog dial is equipped with a delicate switch. If the unit is placed in a carrying case, take precautions to prevent any pressure from being exerted on the surface of the jog dial.
Condensation
When this unit is brought into a warm room from previously cold surroundings or when the room temperature rises sharply, condensation may form inside the unit and impair its performance. In such cases, allow the unit to stand for about an hour or raise the room temperature gradually.
Cleaning the player
To clean the player wipe with a polishing or a soft, dry cloth. For stubborn dirt, moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe the surface dry. Do not use volatile liquids such as benzene or thinner which will damage to the unit.
CD lens cleaner
If for some reason, the lens becomes soiled and malfunctions, contact your nearest PIONEER authorized service center. Lens cleaners for CD players are commercially available, but special care should be exercised in their use as some may cause damage to the lens.
Cleaning the Jog Dial
To clean the jog dial wipe with a polishing or a soft, dry cloth. For stubborn dirt, moisten a soft cloth with a weak solution of neutral detergent (diluted in five to six parts water), wring the cloth well, and wipe away the dirt. Use a dry cloth to wipe the surface dry.
Applying alcohol, paint thinner, benzene, insecticides, or other stringent substances to the jog dial may cause the markings or finishing of the dial to peel or become discolored, and the use of any such substances should accordingly be avoided.
14
En
