TROUBLESHOOTING
Description of problem | Possible cause of problem | Recommended action |
|
|
|
Track won’t load during | • LOAD LOCK is set to ON. | • Use UTILITY screen to set LOAD LOCK to OFF. |
playback. |
|
|
|
|
|
Track searching fails to halt | • Track searching sometimes takes longer than | • Hold the TIME/A.CUE button depressed for one |
with Auto Cue function turned | expected when the length of silent portions | second or more to set the Auto Cue mode to |
ON. | between tracks is unusually long. | OFF. |
| • If the length of a silent portion between two |
|
| tracks is longer than 10 seconds in duration, the |
|
| second track cannot be played back unless Auto |
|
| Cue function is turned OFF. |
|
|
|
|
The jog dial performs a | • The jog mode is incorrect. | • Press the SCRATCH/JOG BREAK button to |
different function from that |
| select the desired function. |
desired. |
|
|
|
|
|
Back cueing fails to work when | • No cueing point has been defined. | • Specify the desired cueing point. (P. 35) |
the CUE button is pressed |
|
|
during playback. |
|
|
|
|
|
Unable to produce loop | • No cueing point (i.e., starting point) has been | • Specify the desired cueing point. (P. 35) |
playback by pressing the OUT/ | defined. |
|
ADJSUT button. |
|
|
|
|
|
Auto cue and other setting are | • The power was turned off right after a setting | • Wait 10 seconds before turning off the power |
not stored. | was made. | after a change. |
|
|
|
Can’t store cue/lop point data | • Insufficient space on USB storage device. | • Delete unnecessary files or other make |
for tracks on USB storage |
| sufficient space on USB storage device. |
device. |
|
|
|
|
|
Recorded USB storage device | • USB storage device was disconnected before | • Always perform proper dismount procedure |
cue and loop points aren’t | performing proper dismount procedure, or | before disconnecting USB storage device or |
displayed. | power was turned off. | turning off power. |
|
|
|
Playlist tracks appear grayed | • The disc or USB storage device for the recorded | • Load or connect the disc or USB storage device |
out. | tracks is not loaded/connected. | for the recorded tracks. |
|
|
|
| • The recorded tracks have been deleted from the | • Once again record the changed file names or |
| USB storage device. | changed locations in the playlist. |
| • The file names for the recorded tracks have been |
|
| changed, or the files moved. |
|
|
|
|
| • USB storage device was disconnected before | • Always perform proper dismount procedure |
| performing proper dismount procedure, or | before disconnecting USB storage device or |
| power was turned off. | turning off power. |
|
|
|
Can’t record tracks located on | • Insufficient space on USB storage device. | • Delete unnecessary files or other make |
USB storage device on playlist. |
| sufficient space on USB storage device. |
|
|
|
Keyboard input isn’t correct. | • KEYBOARD LANGUAGE setting is incorrect. | • Use UTILITY screen’s KEYBOARD LANGUAGE |
|
| setting to select the proper input language. |
|
|
|
| • You are using a keyboard for a language other | • Use a keyboard for one of the supported |
| than the ten supported by this unit. | languages. |
|
|
|
Character data for MP3, AAC | • LANGUAGE setting is incorrect | • Use UTILITY screen’s LANGUAGE setting to |
format tracks appears garbled. |
| select the proper input language. |
|
|
|
| • Input is in unsupported language. | • Input only in one of supported languages. MEP- |
|
| 7000 can support display in Western European |
|
| languages, Russian, Chinese (simplified |
|
| Mandarin), and Japanese. |
|
|
|
Tracks contained in m3u files | • m3u file is not recorded correctly. | • Confirm correct recording format for m3u file. |
won’t load. |
|
|
|
|
|
• Driver software hasn’t been correctly installed in | • Install the driver correctly. If already installed, try | |
connected to computer | computer. | uninstalling and reinstalling it. |
(normal style connections). | If the |
|
| communicating with the computer, the version |
|
| information utility will not display the firmware |
|
| version. To check this, see P. 51 of this manual |
|
| (“ABOUT THE DRIVER PROGRAM, |
|
| Confirming the driver version”). |
|
|
|
|
| • Control unit is connected to computer. | • In Normal Style, connect drive unit to computer. |
|
|
|
English
65
En
