Xerox MAX 200 manual Feature Function, Numbering, Stamp location

Stamper (continued)

The screen below is the stamper screen. It is displayed when you select the stamper button, on the finishing feature group tab.

The stamper screen contains five stamper features; stamp pattern, numbering, stamp location, date stamp, and stamp color.

In order to enable the stamper features select the on button first. The chart in this section, identifies each feature and provides a description of each feature.

Select Stamp number from			Selected 01
Stamp pattern screen
Stamper		Cancel	Done
	No. ??	No Print
On	Stamp	Numbering
	Pattern
	Auto	No Print	Red
Off	Stamp	Date Stamp	Stamp Color
	Location

Feature	Function
On	Enable the stamper features.
Off	Disables the stamper features.
Stamp pattern	This feature allows you to select a stamp pattern,
	print all stamp patterns, manually load stamp
	patterns to memory, or delete all stamp patterns in
	memory. Refer to page 139.
Numbering	This feature creates the numbering stamp. You
	can have a maximum of 12 characters in the
	numbering stamp. Refer to page 141.
Stamp location	This feature sets up the stamp location and
	orientation to the preset values in custom presets.
	Refer to page 147.
Date stamp	This feature creates the date stamp. There are
	two options available current and variable. Refer
	to page 153.

Stamp color This feature prints the stamp pattern in red or

black. Refer to page 158.

138 Finishing touch screen features