Xerox MAX 200 manual Scan to print color default screen is displayed

Copy features

How to change the copy features (continued)

Scan to print color default

Introduction

The scan to print color default feature sets up the colors the scanner recognizes to be printed in red.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features

Stamp Location and Orientation

Folder Setup

Auto/Manual Mode

Media Cut Mode and Doc. Orientation

Lead/Trail Edge Default for Synchro

Background Suppression Level Default

Image Density

Scan to Print Color Default

Storage/Disk Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the copy features tab.

3.Use the arrow buttons to select the scan to print color default feature.

4.Select open.

The scan to print color default screen is displayed.

Custom Presets

Scan to Print Color Default Cancel Done

One or more colors in the original document may be copied red. All other colors will be copied in black.

Red	Green	Others
Blue	Yellow	Black

5.Select the desired colors to be printed in red; red, green, others, blue, yellow or black.

•Multiple colors can be selected.

•Others specify colors other than red, blue, green, yellow, and achromatic colors.

6.Select done to store your changes and exit from this screen. To cancel the changes and exit from this screen, select cancel.

7.To exit, press the custom presets button.

How to customize the MAX 200 225