
Using the Configuration Menu (continued)
Tools> Admin (continued)
Remote Management
Remote Management allows the
IP Address: Internet IP Address of the computer that has access to the Router. It is not recommended that you set the IP Address to * (star), because this allows any Internet IP Address to access the Router, which could result in a loss of security for your network. If you elect to enable Remote Management, make sure to enter the IP Address of the remote computer allowed to configure the
Port: For security purposes, select a separate port number used to access the Router. (The following is an example only; you may use a different port number.)
Example: http://x.x.x.x:8080 where x.x.x.x is the WAN IP Address of the Router and 8080 is the port used for the
Tools > Time
Time settings- In this window you can choose the time zone; set the time; and enable or disable Daylight Savings Time.
Default
NTP Server- NTP is short for Network Time Protocol. NTP synchronizes com- puter clock times in a network of computers.
This field is optional.
35