D-Link AG DI-784 manual Maximum, Idle Time, Auto-reconnect, Home LAN

Using the Configuration Menu (continued)

Home > WAN > PPPoE continued

Primary/Secondary Enter a DNS Address if you do not wish to use the one provided

DNS-	by your ISP. (DNS is short for Domain Name System. It trans-
	lates domain names into IP Addresses).
Maximum	Enter a maximum idle time during which Internet connection is
Idle Time-	maintained during inactivity. To disable this feature, enter zero
	or enable Auto-reconnect.
MTU-	Maximum Transmission Unit-1472 is default-you may need to
	change the MTU to conform with your ISP.
Auto-reconnect-	If enabled, the DI-784 will automatically connect to your ISP af-
	ter your system is restarted or if the connection is dropped.
	Home > LAN

LAN is short for Lo- cal Area Network. This is considered your internal network. These are the IP set- tings of the LAN inter- face for the DI-784. These settings may be referred to as Pri- vate settings. You may change the LAN IP Address if needed. The LAN IP Address is private to your in- ternal network and cannot be seen on the Internet.

IP Address-

Subnet Mask-

Local Domain Name-

The IP Address of the LAN interface. The default IP Asddress is: 192.168.0.1.

The subnet mask of the LAN interface.

The default subnet mask is 255.255.255.0.

The domain name assigned to the router.

19