Xerox MAX 200 manual Color recognition range Color Recognition wheel

How to change the copy features (continued)

Color recognition range (continued)

Color Recognition wheel

Introduction

Magenta 90° Red

Purple

Orange

Violet

180° 0°

Yellow

Blue
	Yellow
Cyan	Green
	Green
	270°

Positions on the wheel are given by an angle. As the angle increases or decreases, the shaded area of the wheel changes to reflect the scanner sensitivity.

Note: If you increase above 359, the angle is automatically adjusted to 0.

The table below lists the factory default range and available ranges.

	Marker				Scanner
Color	Range	Default		Range		Default
Red	0 -100	50	- 70	0 - 226		28	- 90
Yellow	270 - 30	340 - 5		225	- 90	0 - 28
Blue	150 - 270	195	- 230	90	- 0	185	- 236

Green

Example

-

-

123 - 0

236 - 0

Magenta	Red	Magenta	Red
Purple		Purple
	Orange		Orange
Violet		Violet	Yellow
	Yellow
Blue		Blue
	Yellow		Yellow
Cyan	Green	Cyan	Green
	Green		Green
Current red (marker color) range 50 - 70		New red (marker color) range 0 - 70

Problem:

Lets imagine the red edit marker that you are using is not being recognized. Look at the current red marker setting, it is set to 50 - 70. This setting only covers the higher end of red on the color wheel. The marker you are using has a lot of orange and yellow in it.

Solution:

Therefore, you will need to change the color range to include orange and yellow recognition. Change the first number in the range to 0. When the new range is set to 0 – 70, the machine looks for red that contains yellow and orange.

228 How to customize the MAX 200