Xerox MAX 200 With the manual feed tray, Helpful hints

With the manual feed tray

Introduction

Using the manual feed tray is useful when the correct size or type of media is not loaded in the printer, or when you want to make a copy on special size media (A – E).

Refer to the helpful hints before using the manual feed tray procedure on page 64.

Helpful hints

•The manual feed mode is available with the combination of the stamper and E-sorter.

•The stamper feature can be used with manual feed.

•Not available when the E-sorter is being used.

•Copies made with the manual feed tray, can not be folded.

Procedure

1.Ensure MAX 200 is in manual mode. If needed, press the mode select button until the manual mode lamp is lit.

2.Select the basic feature group tab.

3.Select R/E; media cut.

The R/E; media; cut screen is displayed.

Ready to copy			Selected 01
Load documents face down
R/E; Media; Cut		Cancel	Done
100.0%	36”	Bond	Synchronized
Normal R/E	24”	Bond	Paper Length
			Adjustment
	24”	Bond
R/E by L&W	18”	Vellum
100.0%	12”x18” Bond		Manual Feed

4.Select manual feed.

The manual feed screen is displayed.

64 How to make copies