Custom Presets
Auto Power Off

How to change the system features (continued)

Auto power off

Introduction

The auto power off feature switches the machine power off, if the machine is not used for a selected period of time. You set the time period.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features

Copy features

Time &Date

Auto Power Off

Auto Power save

Auto Clear/ Backlight Off

Attention Tone

Plotter Setup

Loading Stamp Data

Storage/Disk

Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the system features tab.

3.Use the arrow buttons to select the auto power off feature.

4.Select open.

The auto power off screen is displayed.

CancelDone

Select time (from end of last job) until power off.

 

1 Hour

2 Hours

3 Hours

No

4 Hours

5 Hours

 

5.Select the desired default time; No, 1 – 5 hours.

6.Select done to store your changes and exit from this screen. To cancel the changes and exit from this screen, select cancel.

7.To exit, press the custom presets button.

How to customize the MAX 200

177

Page 179
Image 179
Xerox MAX 200 manual Auto power off screen is displayed