Xerox MAX 200 manual Humidifier optional

Humidifier (optional)

Introduction

The humidifier is an optional accessory and adds moisture to the media. Depending on the amount of humidity in the room, the humidifier is automatically switched on.

Note: When the printer is switched off, the humidifier remains on. In order to switch the humidifier off, the printer breaker switch must be off.

Note: The humidifier and the heater can not be activated at the same time.

Procedure

1.Turn the key and open the printer circuit breaker door.

2.Position the right switch to humidifier.

3.Position the left switch to on.

Note: You can only switch the heater or the humidifier on, both can not be set to On at the same time.

4.Close the printer circuit breaker door and turn the key to lock the breaker door.

Media 55