Xerox MAX 200 manual How to customize the MAX 199

How to change the copy features (continued)

Stamp location and orientation (continued)

Custom Presets
Stamp location		Cancel	Done
and orientation
Size	Location	Orientation
E	X:5 Y:10	Normal
D	X:5 Y:10	Normal
D	X:5 Y:10	Normal
C	X:5 Y:10	Normal
C	X:5 Y:10	Normal
B	X:5 Y:10	Normal
B	X:5 Y:10	Normal
A	X:5 Y:10	Normal	Open
A	X:5 Y:10	Normal

5.To change the stamp location, use the arrow buttons to select the desired document size and feed direction.

6.Select open.

The stamp location and orientation screen is displayed.

Stamp Location and Orientation
	Cancel	Done
Normal		(0 – 914)
	Y	mm
Rotated 90o		Enter Y
	x
		Coordinated
	(0 – 609)
Rotated 180o
	mm
Rotated 270o	Enter X
	Coordinated

7.Select the desired stamp orientation for the normal option on page 151; Normal, 900, 1800, or 2700.

When the stamp image is scanned (normally portrait), the scanned position becomes the default for normal. When 900, 1800, or 2700 is selected, the stamp is rotated 900, 1800, or 2700 from the default.

8.Select enter x coordinate (you are setting up the x coordinate of the stamp location). Enter the desired dimension using the numeric keypad.

Measure from the left edge of the paper to the left side of the desired stamp location.

How to customize the MAX 200 199