Xerox MAX 200 manual Plotter setup Set default time to plot

How to change the system features (continued)

Plotter setup (continued)

Set default time to plot (continued)

Custom Presets
Plotter Setup	Cancel	Done

30 seconds	Delay Set	No Fold
	3 Minutes
Set Default	Set Delay	Folder
Time to Plot	Time to Copy

5.Select set default time to plot.

The set default time to plot mode screen is displayed.

Custom Presets
Set Default Time to Plot		Cancel	Done
Mode
Select time to switch from copy mode to plotter after
completing a copy job
10 seconds	1 minute	3 minutes	5 minutes
10 minutes	20 minute

6.Select the desire time; 10 seconds, 1, 3, 5, 10, 20 minutes.

7.Select done to store your changes and to exit from the current screen.

To cancel the changes and exit from this screen, select cancel.

8.To exit, press the custom presets button.

184 How to customize the MAX 200