Xerox MAX 200 manual Two color black and red, Select black/red Scanned color screen is displayed

Print color (continued)

Two color (black and red)

Note: This option is automatically enabled, if you set any of the copy features to recognize a specific color on your document to be printed red.

Procedure

1.Select the basic feature group tab. If needed, refer to page 68.

2.Select the print color button, on the basic screen.

The print color screen is displayed.

Ready to copy		Selected 01
Load documents face down
Print Color	Cancel	Done
		Printed as Red
Black/Red		Red
	Printed All in
	Black and Red

Red Only

Black Only

Press [Scanned Color] to select document color(s)

to be printed in red. Scanned Color

3.Select black/red.

4.Select scanner color (specifies the color on the document to be printed in red).

The scanned color screen is displayed.

Ready to copy		Selected 01
Load documents face down
Scanned Color	Cancel	Done
One or more colors in the original document
may be copied in red
All others will be copied in black
Red	Green	Others
Blue	Yellow	Black

5.Select the desired colors, to be copied in red. To cancel a color selection, press the same color button again.

•Multiply colors can be selected.

•Others specify colors other than red, blue, green, yellow, and black.

To cancel the changes and exit from this screen, select cancel.

6.Insert the document to make copies, or select done as required to select additional features.

Basic touch screen features 91