Xerox MAX 200 manual Document image type screen is displayed

Copy features

How to change the copy features (continued)

Document image type

Introduction

The document image type feature sets up the document image type default, located on page 88.

When a document is scanned, the machine makes adjustments to meet specific image quality conditions, for the selected default. When setting up this feature, select the document image type you scan the most.

Procedure

Press [Custom Presets] to return to

Previous screen.

System features

Folder Setup

Auto/ Manual Mode

Media Cut Mode and Document

Orientation

Lead/Trail Edge Default Synchro

Variable length default

Background Suppression Level Default

Image Density

Document Image Type

Storage/Disk Manager

Open

1.Enter custom presets. If needed, refer to page 174.

2.Select the copy features tab.

3.Use the arrow buttons to select the document image type feature.

4.Select open.

The document image type screen is displayed.

Custom Presets
Document Image Type	Cancel	Done

Line Line/Picture Picture Photo

Low Contrast Dark Contrast

5.Select the desired document image type default; line, line/picture, picture, photo, low contrast, or dark contrast.

6.Select done to store your changes and exit from this screen. To cancel the changes and exit from this screen, select cancel.

7.To exit, press the custom presets button.

224 How to customize the MAX 200