Xerox MAX 200 manual Image location screen is displayed

Image location

Introduction

The image location feature shifts the image up, down or to the right in 1-mm increments up to 30 mm.

The image cannot be shifted to the left (the left arrow button is always disabled). If you copy requires a left margin, shift the image to the right.

Note: If needed, you can shift your original to the left by moving the document guides, on the scanner.

Procedure

1.Select the additional feature group tab. If needed, refer to page 95.

2.Select the image location button, on the basic screen.

The image location screen is displayed.

Ready to copy		Selected 01
Load documents face down
Image Location	Cancel	Done
Doc. direction
	(0~999)	100
	0	mm
		100
(0~999)
0	mm
100	100	Clear

3.Select the top or bottom arrow buttons to shift the image up or down. If needed, select the 100 buttons to shift the image in 100 increments.

4.Select the right arrow button to shift the image to the right. If needed, select the 100 button to shift the image in 100 increments.

Select clear to set the values to 0.

To cancel the changes and exit from this screen, select cancel.

5.Insert the document to make copies, or select done as required to select additional features.

96 Additional touch screen features