Additional touch screen features 97
Editing
Introduction
The MAX 200 provides two edit configurations; basic and full. W hen
the optional editing kit is installed, your machine is equipped with the
full configuration.
• If your machine is not equipped with the editing kit, the MAX 200
allows access to the basic edit features only. All basic edit
features are identified with the word basic next to the feature.
• If your machine is equipped with the optional edit kit, the
MAX 200 allows access to all edit features.
The screen below, is the editing screen. It is displayed when you
select the editing button, on the additional feature group tab.
Feature Function
Overall editing Allows you to edit the entire document. Refer to
page 98.
Marker editing Allows you to specify the edit area, with a
marker. You can define multiple edit areas on
your document. Refer to page 107.
Coordinate
editing Allows you to specify a single edit area with, X
and Y coordinates on your document. Refer to
page 119.
Ready to cop
y
Load documents face down Selected
01
Editing Cancel Done
Off Over All
Editing Marker
Editing Coordinates
Editing
Entire
Document
Area Editing
Area Identified by
marker or coordinates