Switching the power-on (continued)

4.Switch the printer power-on.

The switch is located above the door.

5. Position the scanner circuit breaker switch to the on position (up).

The scanner circuit breaker is located at the lower rear right corner.

6. Switch the scanner power-on.

Switching the power off

WARNING: The machine power switch does not break power to the low voltage power supply, to remove power from the machine disconnect the power cord.

Note: This procedure is for the printer and scanner only. If your system contains the folder or stacker, refer to their user guide for power-off instructions.

1. Switch the scanner power off.

The printer power is automatically switched to the off position.

40

MAX 200 power

Page 42
Image 42
Xerox MAX 200 manual Switching the power off